Metallic Black Car Paint 2K Black Automotive Paint Blue Phase Special Black Car Paint

► Product Component

High-quality 2K acrylic paint for medium and high-end cars. It has the characteristics of high gloss, excellent weather resistance, high film thickness, good hardness, and good adhesion. It can be used for partial spraying of new cars or repairing of old cars.

► Product Features

• It has low sticky degree, so it doesn't lead to blocking due to the improvement of sticky degree inside coating pipe. Also, it is easy to construct & has good operation.
• It has good water-soluble performance, so do not result in the residual water exited in cracks which will destroy the foaming for a long time, finally leading to secondary water leakage.
• It finishes the solidification when going through water after 20-120 seconds.
• It has good stability and will not go bad during the construction after opening the seal. Also, it can keep in reserve, without deteriorating, for half a year before breaking the sea.
• It is well sticky with concrete and has good colloidality, no delaminating with concrete.
• It doesn't affect the physical property of the foaming when going through mete-acid, sea water and so on.
• It has a long-time water resistance, strong structure & high toughness.

► Product Application

1, It applies to thoroughly ground and cleaned intermediate paints, original paint or intact 2K paint surface. And soft based materials with an insulating layer.

2, It can be used for partial spraying of new cars or repairing of old cars.

► Surface Treatment

Old paint film that has been hardened and polished, the surface should be dry and free of impurities such as grease.

► Construction Method

1. Spray as far as possible, special cases can be brush coating;

2. The paint must be evenly mixed during construction,and the paint should be diluted with a special solvent to the viscosity required for construction.

3. During construction,the surface should be dry and cleaned of dust.

4. Spray 2-3 layers, can be polishing after 15 hours.

► Construction Condition

1. Base temperature is not less than 5°C,the relative humidity of 85% (temperature and relative humidity should be measured near the base material),fog, rain , snow, wind and rain is strictly prohibited construction.

2. Before painting the paint, clean the coated surface to avoid impurities and oil.

3. The product can be sprayed, it is recommended to spray with special equipment. The nozzle diameter is 1.2-1.5mm,the film thickness is 40-60um.

► Package and Shipping

Paint:1L 

► FAQ

Q1, Are you manufacturer or trading factory?

A: In fact we are the factory more then 10 years, can supply all types of paint.

Q2, If the OEM is accepted?

A: Yes, OEM is welcome. We also can do your own logo and package.

Q3, If I do not know which paint to choose, what shall I do?

A: Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.

Q4, What’s are your payment term?

A: We can accept the TT, Western Union, LC, Credit card, and Alipay, and others please contact with us freely.

Q5, Can you accept to supply the free sample?

A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight cost.

Q6, Do you have more ways to contact with you?

A: Yes, you can contact with us by mobile/wechat/whatsapp:0086 185 3817 3191.

Q7, What's your products' advantages ?

A. Good quality and competitive prices.

B. Strictly quality control when producing.

C. Professional team work, from design, development, producing,assemble,packing and shipping.

D. Experience for shipping the paint to different countries.

Q8, Can we visit your factory?

You are Warmly welcomed to visit our factory, it would be our great pleasure.

► Contact Us