|
Product Details:
Payment & Shipping Terms:
|
| Product Names: | Metallic Car Paint | Paint Film Property: | Quick Drying And Good Levelling |
|---|---|---|---|
| Gloss: | Excellent | Appearance: | Liquid |
| Paint System: | Acrylic | Market: | Global |
| High Light: | 4L Metallic Car Spray Paint scratch repair,chemical resistant Metallic Car Spray Paint,4L car lacquer scratch repair |
||
Metallic Car Paint is one-component base coat with solid colors, metallic and pearl effect. High solid, high quality, abundant colors, obvious metallic effect, strong covering power and excellent weather resistance.
|
Item |
Datas |
|
Color |
Color |
|
Mixture rate |
2:1:0.3 |
|
Spraying coating |
2-3 layers,40-60um |
|
Interval of time(20°) |
5-10 minutes |
|
Drying time |
Surface dry 45 minutes, polished 15 hours. |
|
Available time (20°) |
2-4 hours |
|
Spraying and applying tool |
Geocentric spray gun(upper bottle) 1.2-1.5mm;3-5kg/cm² |
|
Suction spray gun(lower bottle) 1.4-1.7mm; 3-5kg/cm² |
|
|
Theory quantity of paint |
2-3 layers about 3-5㎡/L |
|
Storage life |
Store for more than two years keep in original container |
Our Metallic Car Paint suitable for each decoration and protection of outdoor product such as electrical Appliance, constructive aluminum profiles, transport facilities, gym and stadium facilities, courtyard facility etc.
1. Over 150000 formulations
2. Consistent formula developing
3. Cover all vehicle brands all over the world
4. Customized formula developing service
Repair the Surface
Before you start painting the vehicle, you need to get rid of any dents and scratches that are present. To work on dents, remove any rust or paint on the affected area. Use an electric grinder to help. After applying body filler to the dent, you will have to wipe it off according to the instructions and then sand the surface to get an even finish.
Prepare and Prime the Car
If you're doing a full body paint job, you have to sand the entire vehicle before you start applying the primer. Work slowly when sanding the vehicle so you get good end results. Once you've finished sanding the surface of the car, apply good quality primer that's ideal for the type of paint you wish to use. Paints often react to certain primers. It's important to read the technical data sheets of the products you purchase.
Clean the Surface
After the primer has been applied, the surface has to be sanded again to make it smooth. Since this sanding process causes dust and particles to settle on the surface, use a grease remover to clean the metal.
Mix the Paint
One of the most important techniques used to get a paint job done properly is correct mixing of the paint. Follow the instructions listed on the paint package and use a paint mixing pail to help you attain the right viscosity. You may have to use a particular brand of thinner or reducer if required. Paint that's too thin will run lines, while paint that's too thick won't flow out easily from the spray gun.
Apply the Paint
The paint needs to be applied in thin coats and left to dry completely after each coat is sprayed on. You could also use a clear coat to finish off. It's important to follow these principles of painting in order to get a professional finish. If you're painting the car for the first time, practice using the spray gun on any other metallic surface before working on your vehicle.
1. Base temperature is not less than 5°C,the relative humidity of 85% (temperature and relative humidity should be measured near the base material),fog, rain , snow, wind and rain is strictly prohibited construction.
2. Before painting the paint, clean the coated surface to avoid impurities and oil.
3. The product can be sprayed, it is recommended to spray with special equipment. The nozzle diameter is 1.2-1.5mm,the film thickness is 40-60um.
Paint:1L and 4L or Customize.
International express
For sample order, we'll suggest you shipping by DHL, TNT or air shipping. They are the most fast and convenient shipping ways. To keep the goods in good condition, there will be wood frame outside the carton box.
Sea shipping
For LCL shipment volume over 1.5CBM or full container, we'll suggest you shipping by sea. It is the most economical mode of transport. For LCL shipment, normally we will put all the goods standing on the pallet, besides, there will be plastic film wrapped outside the goods.
1, Competitive price with good quality;
2, Very good package, store products better in your country;
3, We have over 23 years experience, support you professional technical;
4, Fast delivery time, let you get products quickly after make order;
5, Reliable Manufacturer because our products quality approved by over 800 customers.
Contact Person: Mary Geng
Tel: +8618538305829
