|
Product Details:
Payment & Shipping Terms:
|
| Keyword: | High Quality Car Paint Primer | Model: | FPTMG-701 |
|---|---|---|---|
| Color: | Grey | Volume: | 1L |
| Usage: | Car Paint Primer | Application Method: | Spray |
| Selling Units: | Tins，Cans | State: | Liquid Coating |
| Package: | 1L*18cartons, 4L*4cartons, 0.5L*48cartons,20kg | ||
| High Light: | Automotive Primer Spray Paint Anti Corrosion,Automotive Primer Spray Paint Correction,Anti Corrosion car paint Correction |
||
It is high solid content and fast dry acrylic clear coat. Especially formulated for spray over 1K base coat to give very glossy finishing. Excellent yellow and weather resistant. Outstanding flow, leveling and anti-scratch. Good thick film and clear appearance.
| Item | Datas |
| Color | Grey |
| Mixture rate | 2:1:0.3 |
| Spraying coating | 2-3 layers,40-60um |
| Interval of time(20°) | 5-10 minutes |
| Drying time | Surface dry 45 minutes, polished 15 hours. |
| Available time (20°) | 2-4 hours |
| Spraying and applying tool | Geocentric spray gun(upper bottle) 1.2-1.5mm;3-5kg/cm² |
| Suction spray gun(lower bottle) 1.4-1.7mm; 3-5kg/cm² | |
| Theory quantity of paint | 2-3 layers about 3-5㎡/L |
| Storage life | Store for more than two years keep in original container. |
1, Perfect corrosion protection properties
2, Suitable for isolation of sanded surface
3, Filler and Primer at the same time Super smooth running
4, Fast drying
5, Simple and time-saving application
6, Over-paintable with water based paints
7, Over-paintable with 1K and 2K Top Coat systems
1, It applies to thoroughly ground and intact old paint layer. Original paint and fully dried 2K lacquer finish putty. Stainless stell, plastic, galvanized steel and aluminum surface can be used.
2, Primer for luxury cars and commercial vehicles, can be used for new car spraying and old car repair
3, It is composed of a variety of weather-resistant resins, high-quality, strong hiding power, can be formulated with various plain, metallic, pearl effect single-component base paints, and has excellent interlayer adhesion.
4, It applies to the surface of base coat.
Old paint film that has been hardened and polished, the surface should be dry and free of impurities such as grease.
1.Spray as far as possible, special cases can be brush coating;
2.The paint must be evenly mixed during construction,and the paint should be diluted with a special solvent to the viscosity required for construction.
3.During construction,the surface should be dry and cleaned of dust.
4.Spray 2-3 layers, can be polishing after 15 hours.
Spraying and applying layers: 2-3 layers, 15-25um in total
Interval: 5-10 minutes, 20℃
Spraying and applying tool: Geocentric spray gun (upper bottle) 1.4-1.6mm, 3-5kg/cm²
Spraying air pressure: suction spray gun (lower bottle) 1.3-1.8mm; 3-5kg/cm²
Please allow the primer to dry thoroughly before spraying the top coat, otherwise blisters will appear.
Paint:1L
Q1, Are you manufacturer or trading factory?
A: In fact we are the factory more then 10 years, can supply all types of paint.
Q2, If the OEM is accepted?
A: Yes, OEM is welcome. We also can do your own logo and package.
Q3, If I do not know which paint to choose, what shall I do?
A: Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.
Q4, What’s are your payment term?
A: We can accept the TT, Western Union, LC, Credit card, and Alipay, and others please contact with us freely.
Q5, Can you accept to supply the free sample?
A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight cost.
Q6, Do you have more ways to contact with you?
A: Yes, you can contact with us by mobile/wechat/whatsapp:0086 185 3817 3191.
Q7, What's your products' advantages ?
A. Good quality and competitive prices.
B. Strictly quality control when producing.
C. Professional team work, from design, development, producing,assemble,packing and shipping.
D. Experience for shipping the paint to different countries.
Q8, Can we visit your factory?
You are Warmly welcomed to visit our factory, it would be our great pleasure.
Contact Person: Anna
Tel: +86 185 3817 3191
