Product Details:
Payment & Shipping Terms:
|
Car Name: | Gloss Pearl White Car Paint | Gloss: | Very High |
---|---|---|---|
Application Method: | Spray | Selling Units: | Tins,Cans |
Main Material: | Acrylic | Color: | Super White Pearl |
State: | Liquid | MOQ: | 1 Carton |
High Light: | Weather Resistant Pearl White Truck Paint,Liquid Pearl White Truck Paint,Weather Resistant pearl white color car paint |
Item |
Datas |
Color |
Super white goarse pearl |
Mixture rate |
2:1:0.3 |
Spraying coating |
2-3 layers,40-60um |
Interval of time(20°) |
5-10 minutes |
Drying time |
Surface dry 45 minutes, polished 15 hours. |
Available time (20°) |
2-4 hours |
Spraying and applying tool |
Geocentric spray gun(upper bottle) 1.2-1.5mm;3-5kg/cm² |
Suction spray gun(lower bottle) 1.4-1.7mm; 3-5kg/cm² |
|
Theory quantity of paint |
2-3 layers about 3-5㎡/L |
Storage life |
Store for more than two years keep in original container |
Pearl white means that in the monotonous white paint, aluminum powder (metallic paint) is not added, but a substance similar to mica fragments (powder) is added, so that the white paint shows a pearlescent color on the surface that is very similar to the surface of a white pearl under reflection. That is, when the light/sunlight is in direct sunlight, the lacquer will appear white like a matte texture, and the reflective parts will be discolored. Depending on factors such as the color temperature and angle of the light, it may appear slightly yellow/green/pink/blue.
1. Beautiful. White will make the vehicle more high-end. Pearl white paint is added with pearl powder, which looks brighter than ordinary car paint in the sun and has a stronger sense of quality.
2. Stronger protection. Pearl white is sprayed with white paint, and then sprayed with a layer of top coat containing pearl particles. The process is more complicated.
Paint
The pearl silver pink paint spraying is divided into three sprays: the first spray is mist spray, and the gun speed can be relatively fast, so that the repaired area or the whole car can be sprayed as thin as a mist, so that the paint can adhere to the intermediate paint film. The second time spraying covers the intermediate paint or putty red and gray layer, showing the color. Be careful not to have silver-pink paint stains, blooming and other problems. The speed of the gun can be slightly faster. The third spraying is to correct the uneven spraying caused by the second spraying. Generally speaking, it is the standard that the color of the repaired area or the entire car should be uniformly covered.
Varnish
1. After spraying the color paint, flash dry for 5~15min, so that part of the solvent will evaporate, and spray after the coating becomes dry. You can spray the varnish when you touch the coating lightly with your fingers and do not stain the color. If the paint surface is rough or prevent dust. It can be wiped with dust cloth and compressed air while blowing. After wiping, use a degreasing agent to degreasing (called degreasing agent in the industry).
2. The first spraying of the varnish is mainly mist spraying. It should not be sprayed too thickly, and sprayed to the extent that the gloss can appear slightly, and the running speed of the spray gun can be slightly faster.
3. The second coat of varnish spraying is for decoration, and the brightness should be sprayed; pay attention to flatness and gloss. Use the two-pass (back and forth) spraying method to spray overlappingly, and the spray gun runs at a normal or slightly slower speed.
1. Base temperature is not less than 5°C,the relative humidity of 85% (temperature and relative humidity should be measured near the base material),fog, rain , snow, wind and rain is strictly prohibited construction.
2. Before painting the paint, clean the coated surface to avoid impurities and oil.
3. The product can be sprayed, it is recommended to spray with special equipment. The nozzle diameter is 1.2-1.5mm,the film thickness is 40-60um.
1.when the temperature is lower than 15 ℃ , air dry is not recommended , it's better to dry in baking room at 60 ℃
2.when the temperature is higher than 30 ℃ , you should add retarder in thinner to avoid blushing , pls refer to the retarder technical detail .
3.when fish appear during application , pls add 0.5-1% anti-silicon in the remain paint and respray.
4.at the edge of old paint and new paint film , you can apply joining agent as to achieve a perfect transition , pls refer to the joining agent technical detail .
5.when mix with hardener , hardener should use oil soon and can not store for future use .
6.use thinner to clean all spray tool immediately after application or it will hard to clean when drying .
Contact Person: Mary Geng
Tel: +8618538305829