Popular 1K Gloss Pearl White Color Car Paint Factory Price FPCP-M1127

► Product Formation

As long as the paint is exposed to the sun, no matter what color the paint is, the paint will fade. There are many things about paint color that may fade in the sun. How to do it? Additives are very important at this time. Generally, light stabilizers and antioxidants are added to paint. Additives are very expensive. The quality of the additives determines how the paint feels. For example, a certain paint that has started to show obvious fading in 2 years can still maintain its brightness as new for 5 years after adding additives. But there is no paint that does not fade. Try to make the body fade evenly, and not make different parts of the body fade to different degrees.

► Advantages

White cars have high reflectivity and higher recognition than other colors. Driving is safer, especially at night when driving is easy to be found by other drivers, which reduces the incidence of accidents.

Disadvantages: Pearl white is easy to yellow, especially as a car paint that is exposed to the wind and sun, it may become yellow after two or three years of use.

► Spraying Method

Paint

The pearl silver pink paint spraying is divided into three sprays: the first spray is mist spray, and the gun speed can be relatively fast, so that the repaired area or the whole car can be sprayed as thin as a mist, so that the paint can adhere to the intermediate paint film. The second time spraying covers the intermediate paint or putty red and gray layer, showing the color. Be careful not to have silver-pink paint stains, blooming and other problems. The speed of the gun can be slightly faster. The third spraying is to correct the uneven spraying caused by the second spraying. Generally speaking, it is the standard that the color of the repaired area or the entire car should be uniformly covered.

Varnish

1. After spraying the color paint, flash dry for 5~15min, so that part of the solvent will evaporate, and spray after the coating becomes dry. You can spray the varnish when you touch the coating lightly with your fingers and do not stain the color. If the paint surface is rough or prevent dust. It can be wiped with dust cloth and compressed air while blowing. After wiping, use a degreasing agent to degreasing (called degreasing agent in the industry).

2. The first spraying of the varnish is mainly mist spraying. It should not be sprayed too thickly, and sprayed to the extent that the gloss can appear slightly, and the running speed of the spray gun can be slightly faster.

3. The second coat of varnish spraying is for decoration, and the brightness should be sprayed; pay attention to flatness and gloss. Use the two-pass (back and forth) spraying method to spray overlappingly, and the spray gun runs at a normal or slightly slower speed.

► Construction Tips

1. Base temperature is not less than 5°C,the relative humidity of 85% (temperature and relative humidity should be measured near the base material),fog, rain , snow, wind and rain is strictly prohibited construction.

2. Before painting the paint, clean the coated surface to avoid impurities and oil.

3. The product can be sprayed, it is recommended to spray with special equipment. The nozzle diameter is 1.2-1.5mm,the film thickness is 40-60um.

► Notes

Spraying and applying layers: 2-3 layers, 50-70um in total

Interval: 5-10 minutes, 20℃

Spraying and applying tool: Geocentric spray gun (upper bottle) 1.2-1.5mm, 3-5kg/cm²

Spraying air pressure: suction spray gun (lower bottle) 1.4-1.7mm; 3-5kg/cm²

1, Light-colored paint is not allowed to be sprayed with varnish, otherwise the color will turn yellow.

2, Before spraying the top coat, sand the primer with P800 fine sandpaper.

3, Please let the primer dry thoroughly before spraying the top coat, otherwise blisters will appear.

► Package and Shipping

► Contact Us