Gloss pearl white color car paint receive customized colors FPCP-M11276

► Product Description

Pearl white means that in the monotonous white paint, aluminum powder (metallic paint) is not added, but a substance similar to mica fragments (powder) is added, so that the white paint shows a pearlescent color on the surface that is very similar to the surface of a white pearl under reflection. That is, when the light/sunlight is in direct sunlight, the lacquer will appear white like a matte texture, and the reflective parts will be discolored. Depending on factors such as the color temperature and angle of the light, it may appear slightly yellow/green/pink/blue.

► Advantages

1, High Gloss

2, Paint protection

3, Lock in the colour

4, Ease of maintenance

5, Durable last for 3-5 years

6, Hydrophobic / water beading effect

7, Reduce visibility of minor scratches

► Spraying Method

Paint

The pearl silver pink paint spraying is divided into three sprays: the first spray is mist spray, and the gun speed can be relatively fast, so that the repaired area or the whole car can be sprayed as thin as a mist, so that the paint can adhere to the intermediate paint film. The second time spraying covers the intermediate paint or putty red and gray layer, showing the color. Be careful not to have silver-pink paint stains, blooming and other problems. The speed of the gun can be slightly faster. The third spraying is to correct the uneven spraying caused by the second spraying. Generally speaking, it is the standard that the color of the repaired area or the entire car should be uniformly covered.

Varnish

1. After spraying the color paint, flash dry for 5~15min, so that part of the solvent will evaporate, and spray after the coating becomes dry. You can spray the varnish when you touch the coating lightly with your fingers and do not stain the color. If the paint surface is rough or prevent dust. It can be wiped with dust cloth and compressed air while blowing. After wiping, use a degreasing agent to degreasing (called degreasing agent in the industry).

2. The first spraying of the varnish is mainly mist spraying. It should not be sprayed too thickly, and sprayed to the extent that the gloss can appear slightly, and the running speed of the spray gun can be slightly faster.

3. The second coat of varnish spraying is for decoration, and the brightness should be sprayed; pay attention to flatness and gloss. Use the two-pass (back and forth) spraying method to spray overlappingly, and the spray gun runs at a normal or slightly slower speed.

► Construction Process

Repair the Surface
Before you start painting the vehicle, you need to get rid of any dents and scratches that are present. To work on dents, remove any rust or paint on the affected area. Use an electric grinder to help. After applying body filler to the dent, you will have to wipe it off according to the instructions and then sand the surface to get an even finish.

Prepare and Primer the Car
If you're doing a full body paint job, you have to sand the entire vehicle before you start applying the primer. Work slowly when sanding the vehicle so you get good end results. Once you've finished sanding the surface of the car, apply good quality primer that's ideal for the type of paint you wish to use. Paints often react to certain primers. It's important to read the technical data sheets of the products you purchase.

Clean the Surface
After the primer has been applied, the surface has to be sanded again to make it smooth. Since this sanding process causes dust and particles to settle on the surface, use a grease remover to clean the metal.

Mix the Paint
One of the most important techniques used to get a paint job done properly is correct mixing of the paint. Follow the instructions listed on the paint package and use a paint mixing pail to help you attain the right viscosity. You may have to use a particular brand of thinner or reducer if required. Paint that's too thin will run lines, while paint that's too thick won't flow out easily from the spray gun.

► Package and Shipping

Shipping & Package

International express

For sample order, we'll suggest you shipping by DHL, TNT or air shipping. They are the most fast and convenient shipping ways. To keep the goods in good condition, there will be wood frame outside the carton box.

Sea shipping

For LCL shipment volume over 1.5CBM or full container, we'll suggest you shipping by sea. It is the most economical mode of transport. For LCL shipment, normally we will put all the goods standing on the pallet, besides, there will be plastic film wrapped outside the goods.

► Company

The reason you choose us
1, Competitive price with good quality;
2, Very good package, store products better in your country;
3, We have over 10 years experience, support you professional technical;
4, Fast delivery time, let you get products quickly after make order;
5, Reliable Manufacturer because our products quality approved by over 800 customers.

► FAQ

Q:What's your MOQ?
A:It can be run according to your specific business plan, and we can measure your order according to your actual situation.

Q: Can we do OEM?
A:Yes, OEM is welcome.

Q: Are you manufacturer or trading company?
A:We are professional manufacturer and we have our own Factory.

Q:Can we visit your factory?
A:Yes. You are welcome to our factory.

Q:How about your payment?
A:30% deposit in advance, 70% balance by T/T, Western Union or else before shipment.

Q:Do you provide samples?
A:Yes, we can provide you with free samples, you just need to pay for freight.

Q:How about your delivery time?
A:Usually 7days after receiving your deposit.

► Contact Us