|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Pearl White High Gloss Car Paint | Application: | Car |
|---|---|---|---|
| Advantage: | Scratch Resistant | Transport: | By Sea Or Express |
| Raw Material: | Acrylic Resin | Layers: | 2-3 Layers |
| Kind Of Paint: | Paint For Car Overall Refinishing | MOQ: | To Be Negotiate |
| High Light: | Gloss White Pearl Paint Colors For Cars,Tin White Pearl Paint Colors For Cars,3 Layers White Pearl Paint Colors |
||
|
Item |
Datas |
|
Color |
Super white goarse pearl |
|
Mixture rate |
2:1:0.3 |
|
Spraying coating |
2-3 layers,40-60um |
|
Interval of time(20°) |
5-10 minutes |
|
Drying time |
Surface dry 45 minutes, polished 15 hours. |
|
Available time (20°) |
2-4 hours |
|
Spraying and applying tool |
Geocentric spray gun(upper bottle) 1.2-1.5mm;3-5kg/cm² |
|
Suction spray gun(lower bottle) 1.4-1.7mm; 3-5kg/cm² |
|
|
Theory quantity of paint |
2-3 layers about 3-5㎡/L |
|
Storage life |
Store for more than two years keep in original container |
Pearl white means that in the monotonous white paint, aluminum powder (metallic paint) is not added, but a substance similar to mica fragments (powder) is added, so that the white paint shows a pearlescent color on the surface that is very similar to the surface of a white pearl under reflection. That is, when the light/sunlight is in direct sunlight, the lacquer will appear white like a matte texture, and the reflective parts will be discolored. Depending on factors such as the color temperature and angle of the light, it may appear slightly yellow/green/pink/blue.
Beautiful. White will make the vehicle more high-end. Pearl white paint is added with pearl powder, which looks brighter than ordinary car paint in the sun and has a stronger sense of quality.
Stronger protection. Pearl white is sprayed with white paint, and then sprayed with a layer of top coat containing pearl particles. The process is more complicated.
Pot Life: 25℃ ,Diamond clear coat + Fast hardener :1.5 hours;
Diamond clear coat + Standard or Slow hardener : 2 hours.
25℃, Special grade clear coat (or Mirror effect clear coat)+ Fast hardener :2 hours; Diamond clear coat + Standard or Slow hardener : 4 hours.
Spray Gun & Pressure:
Gravity Feed 1.2-1.5mm 3-5 bar
Siphon Feed 1.4-1.7mm 3-5 bar
Repair the Surface
Before you start painting the vehicle, you need to get rid of any dents and scratches that are present. To work on dents, remove any rust or paint on the affected area. Use an electric grinder to help. After applying body filler to the dent, you will have to wipe it off according to the instructions and then sand the surface to get an even finish.
Prepare and Primer the Car
If you're doing a full body paint job, you have to sand the entire vehicle before you start applying the primer. Work slowly when sanding the vehicle so you get good end results. Once you've finished sanding the surface of the car, apply good quality primer that's ideal for the type of paint you wish to use. Paints often react to certain primers. It's important to read the technical data sheets of the products you purchase.
Clean the Surface
After the primer has been applied, the surface has to be sanded again to make it smooth. Since this sanding process causes dust and particles to settle on the surface, use a grease remover to clean the metal.
Mix the Paint
One of the most important techniques used to get a paint job done properly is correct mixing of the paint. Follow the instructions listed on the paint package and use a paint mixing pail to help you attain the right viscosity. You may have to use a particular brand of thinner or reducer if required. Paint that's too thin will run lines, while paint that's too thick won't flow out easily from the spray gun.
Shipping & Package
International express
For sample order, we'll suggest you shipping by DHL, TNT or air shipping. They are the most fast and convenient shipping ways. To keep the goods in good condition, there will be wood frame outside the carton box.
Sea shipping
For LCL shipment volume over 1.5CBM or full container, we'll suggest you shipping by sea. It is the most economical mode of transport. For LCL shipment, normally we will put all the goods standing on the pallet, besides, there will be plastic film wrapped outside the goods.
The reason you choose us
1, Competitive price with good quality;
2, Very good package, store products better in your country;
3, We have over 10 years experience, support you professional technical;
4, Fast delivery time, let you get products quickly after make order;
5, Reliable Manufacturer because our products quality approved by over 800 customers.
1. Q:What's your MOQ?
A:Our MOQ is 300 Liters.
2. Q: Can we do OEM?
A:Yes, OEM is welcome.
3. Q: Are you manufacturer or trading company?
A:We are professional manufacturer and we have our own factory.
4. Q:Can we visit your factory?
A:Yes. You are welcome to our factory.
5. Q:How about your payment?
A:30% deposit in advance, 70% balance by T/T, L/C, Western Union or else before shipment.
6. Q:Do you provide samples?
A:Yes, we can provide you with free samples, you just need to pay for freight.
7. Q:How about your delivery time?
A:Usually 20 workdays after receiving your deposit.
Contact Person: Mary Geng
Tel: +8618538305829
