|
Product Details:
Payment & Shipping Terms:
|
| Product Names: | Automotive Paint | Raw Material: | Acrylic Resin, Pigment |
|---|---|---|---|
| Thickness: | 40um | Shelf Time: | 12 Months |
| Solid Content: | 60% | Key Words: | Automotive Repair Paint |
| High Light: | Fast Drying Automotive Refinish Paint,Automotive Refinish Paint 40um,40um auto body clear coat |
||
Automotive repair paint is used on automobiles for both protection and decoration purposes. Water-based acrylic polyurethane enamel paint is currently the most widely used paint for reasons including reducing paint’s environmental impact.
|
Item |
Datas |
|
Color |
Color |
|
Mixture rate |
2:1:0.3 |
|
Spraying coating |
2-3 layers,40-60um |
|
Interval of time(20°) |
5-10 minutes |
|
Drying time |
Surface dry 45 minutes, polished 15 hours. |
|
Available time (20°) |
2-4 hours |
|
Spraying and applying tool |
Geocentric spray gun(upper bottle) 1.2-1.5mm;3-5kg/cm² |
|
Suction spray gun(lower bottle) 1.4-1.7mm; 3-5kg/cm² |
|
|
Theory quantity of paint |
2-3 layers about 3-5㎡/L |
|
Film Thickness |
30~40 micrometer |
Low VOC, fast drying speed of hard drying, good fullness of paint film, high gloss, good hardness,excellent weathering performance and easy workability.
Automotive repair paint is widely used to all kinds of cars, buses, buses and industrial aspects of large area repair or whole vehicle spraying.
To ensure best results on an auto body, the following is the basic workflow of auto refinishing process.
Cleaning the surface:
Begin by completely removing the older coatings and bringing the substrate back in the form of a bare metal. For achieving this we can use remover for metal surfaces. Use paint brush and hand gloves to safely apply paint remover all over the auto body. In sometime, old coat will start to swell. Completely remove that paint waste and thoroughly clean the surface with a soap and water wash followed by degreaser to ensure metal is completely clean and free from grease, oil or any other contamination in older finish. Execute this step carefully as it is one of the most overlooked steps in auto body repair and causes the most aggravation when it comes to spray the new paint on the vehicle.
Repairing the surface:
Deep dents should be completely removed before starting to get repaired. Little indentations or uneven surface can be treated by using quality body filler. Lightweight body filler makes this task less tedious as it is easy to sand and long lasting. After applying body filler sanding plays the key role. Body filler should be sanded to make it even and smoother. Now, next comes in is polyester putty to straighten the panel. Putty helps in shaping up the panel which eventually lost its shape due to dent removal. Putty should always be applied in thin multiple layers and sanded between coats to promote proper adhesion. Once the putty has been applied, it must be sanded smooth. The more smooth it is, the less primer will be needed to fill the scratches that are left in the putty.
Get it primed:
Now, that we have repaired and reframed the auto body we can proceed further and get it primed. This step is important to make sure that no indentations are left on the surface and it is smooth enough. Use of good quality of primer is highly recommended as it plays a key role here and fills the uneven surface if still left. Forest Paint Primer surface is highly recommended as it is rust resistant, dries quickly, easy to sand and has excellent adhesion. Sanding of primer is done next to smooth the surface. Block sanding is also done to ensure that the primer surface is blocked and good enough to proceed.
Apply base coat
Now is the time to achieve the last and final step i.e. applying top coat. Forest Paint brand Clear is a highly recommended topcoat which have best features such as:
Excellent chemical resistance and UV resistance
Great adhesion
Mirror like glossy finish
Non yellowing property
Scratch free
Long life and flexible.
Mixing ratio of base and hardener should be taken care followed by dilution ratio and also apply top coat in a dust free zone or a proper ventilated paint booth for best results.
Leave it to dry, proper drying time should be taken care of before final rubbing and polishing.
Automotive repair paint package size : Paint:1L,2L and 4L or Customize. If you want to do own brand, please contact our us!
Sea shipping
For LCL shipment volume over 1.5CBM or full container, we'll suggest you shipping by sea. It is the most economical mode of transport. For LCL shipment, normally we will put all the goods standing on the pallet, besides, there will be plastic film wrapped outside the goods.
1. Are you factory?
We are 100% manufacturer in South China, located in Guangzhou which takes only 40 mins drive from the Airport.
2. How can we visit your factory?
You can contact us to confirm the arriving time and we will send driver to pick you up at hotel.
3. How to assure product quality and quantity?
Each production process are checked by QC departments, the chemical raw material and products are stored in good warehouse, in case any rains, direction sunshine,etc.
Contact Person: Mary Geng
Tel: +8618538305829
