|
Product Details:
Payment & Shipping Terms:
|
| Product Names: | Automotive Refinish | Raw Material: | Acrylic Resin, Pigment, Solvent |
|---|---|---|---|
| Spray Rate: | ≥99% | Shelf Time: | 12 Months |
| Solid Content: | 60% | Key Words: | Refinish Paint |
| High Light: | Forest Automotive Finishes Paint,1k Automotive Finishes Paint,Forest automotive 1k clear coat |
||
Refinish paint features high solid content, good weather resistance and performs brilliant luster and hardness. Suitable for spray on the surface of one-component base coat.
|
Item |
Datas |
|
Color |
Color |
|
Mixture rate |
2:1:0.3 |
|
Spraying coating |
2-3 layers,40-60um |
|
Interval of time(20°) |
5-10 minutes |
|
Drying time |
Surface dry 45 minutes, polished 15 hours. |
|
Available time (20°) |
2-4 hours |
|
Spraying and applying tool |
Geocentric spray gun(upper bottle) 1.2-1.5mm;3-5kg/cm² |
|
Suction spray gun(lower bottle) 1.4-1.7mm; 3-5kg/cm² |
|
|
Theory quantity of paint |
2-3 layers about 3-5㎡/L |
|
Film Thickness |
30~40 micrometer |
Low VOC, fast drying speed of hard drying, good fullness of paint film, high gloss, good hardness,excellent weathering performance and easy workability.
Automotive repair paint is widely used to all kinds of cars, buses, buses and industrial aspects of large area repair or whole vehicle spraying.
To ensure best results on an auto body, the following is the basic workflow of auto refinishing process.
Cleaning the surface:
Begin by completely removing the older coatings and bringing the substrate back in the form of a bare metal. For achieving this we can use remover for metal surfaces. Use paint brush and hand gloves to safely apply paint remover all over the auto body. In sometime, old coat will start to swell. Completely remove that paint waste and thoroughly clean the surface with a soap and water wash followed by degreaser to ensure metal is completely clean and free from grease, oil or any other contamination in older finish. Execute this step carefully as it is one of the most overlooked steps in auto body repair and causes the most aggravation when it comes to spray the new paint on the vehicle.
Repairing the surface:
Deep dents should be completely removed before starting to get repaired. Little indentations or uneven surface can be treated by using quality body filler. Lightweight body filler makes this task less tedious as it is easy to sand and long lasting. After applying body filler sanding plays the key role. Body filler should be sanded to make it even and smoother. Now, next comes in is polyester putty to straighten the panel. Putty helps in shaping up the panel which eventually lost its shape due to dent removal. Putty should always be applied in thin multiple layers and sanded between coats to promote proper adhesion. Once the putty has been applied, it must be sanded smooth. The more smooth it is, the less primer will be needed to fill the scratches that are left in the putty.
Get it primed:
Now, that we have repaired and reframed the auto body we can proceed further and get it primed. This step is important to make sure that no indentations are left on the surface and it is smooth enough. Use of good quality of primer is highly recommended as it plays a key role here and fills the uneven surface if still left. Forest Paint Primer surface is highly recommended as it is rust resistant, dries quickly, easy to sand and has excellent adhesion. Sanding of primer is done next to smooth the surface. Block sanding is also done to ensure that the primer surface is blocked and good enough to proceed.
Apply base coat
Now is the time to achieve the last and final step i.e. applying top coat. Forest Paint brand Clear is a highly recommended topcoat which have best features such as:
Excellent chemical resistance and UV resistance
Great adhesion
Mirror like glossy finish
Non yellowing property
Scratch free
Long life and flexible.
Mixing ratio of base and hardener should be taken care followed by dilution ratio and also apply top coat in a dust free zone or a proper ventilated paint booth for best results.
Leave it to dry, proper drying time should be taken care of before final rubbing and polishing.
► Package and Shipping
We main manufacture automotive paint included
a) 2k top coat in different solid colours,
b) 1k base coat included metallic colours,silver and pearl colours,
c) 2k high solid clear coat,Mirror effective clear coat,hardener,thinner to make the surface more bright,
d) 1k,2k primer can be quickly drying and easy sanding
e) epoxy primer,alloy primer for the bottom layer
f) 1k plastic primer good for bumper of cars.
we can be tailor made your own brand,with flexible marketing needs with competitive price.
► FAQ
Q1: Do you have formulas for mixing the car paint?
A: Yes, we can supply formulas including CD formulas and Online Formula(PC,Cell phone,Wechat).
Q2: Do we need to add binder into the paint?
A: Our paint is not highly concentrated paint, so you do not need to add binders into the paint.
Q3: What kind of materials do you use for your automotive paint?
A: We use high quality raw materials for our automotive paint,
e.g.: resin from Akzo Noble, pigment from BASF, hardener from Bayer, additive from Eastman, etc
Q4: How about your delivery time?
A: 15 working days after receiving the deposit.
Contact Person: Mary Geng
Tel: +8618538305829
